Defined as a natural product, Timber is known for its variation in texture, color and natural features, between batches and pieces of same products. For creating a significant difference in the appearance, two major steps need to be followed. And those steps are finishing and sanding. You need to check out the sample and research well before you select the best timber flooring.
During maximum instances, reputed timber suppliers offer variation in quantities. Timber flooring dries up the moisture with passing time. It solely depends on the local conditions. When you face such a dried up situation, you might have to ask experts for timber floor sanding and polishing service. Consult an expert, if you are suffering from fine cracks in your timber flooring. Keep their numbers handy, as you never know when you might need them.
Services Which are Important
The timber floor sanding and polishing procedure is the job of a professional and they know the right tools that are required for completion of such a task. You might try out some DIY steps, but it is important to take help from leading experts. For the basics, they are going to use sander along with abrasive papers, edging sander, feast floor seal, wood filler. The filler must work in accordance with the matching color of your floor and roller with extension handle and short nap.
As the basic step, the experts will clear out the room of furnishing items and carpets, if any. They might have to remove the underlay areas like staples and tacks. As you are the customer, you need to check the floor for any protruding nail. To sink the nails, the experts will have to take help of a nail punch and a hammer. The nail heads need to be coated.
If the place has been sanded before, the experts will take up leveling service. Here you have to fill up the nail holes with matching timber filler. Floors, which are going to be sanded for the first time, must have their nail holes filled. As the next step, the experts might have to seal the doors with taping plastic for protection against dust. The level of floor will be same as sand, and you need to remove the finishing plates. You can start the medium grit paper, in larger sender. You will need to align the machine in a diagonal manner, starting it with the raised drum. Whenever the drum reaches full speed, you should start with the sanding procedure.
Regular Care of Timber Flooring
As majority of people have their timber floor installed, therefore; proper care is always important. There are some essential tools, which you must keep handy for this process. Some of the basic examples of these tools are drum sander, edge sander and various kinds of sandpaper discs. These are available in various grits, starting from 40 to 120.
You need to take proper care of your floors and avoid damaging it further. You have to lower the drum sander onto floor.
Other than that, you also need to clean the floor from any accumulated dirt or sand, as this will make the floor clear and crystal clean.
You can even take the help of edge sander, while planning to maintain the look of your timber floor. Just make sure that you have a backup plan ready from experts.
It is important to procure help from experts, and avoid using any DIY tricks. You can contact floor sanding and polishing expert first and book for an appointment. With their help, the entire timber floor sanding and polishing procedure will turn out to be a simple task. They are well acquainted with the major steps, and can guide you through.
Comments